KERN & SOHN ALT 250-4B - Manual (Page 41)

ALT_B-PLT_A-PLT_F-BA-e-1333 41
11.2 RS232
 In weighing mode press the MENU button and keep it pressed until the acoustic
signal gets mute. The setup menu is displayed.
 Use the navigation buttons  to select the menu item „Serial output“.
 Acknowledge using PRINT button, the current setting is displayed.
 Use the navigation buttons  to select the desired setting.
Display Description
Continuous Continuous data output
On demand
Output of stable weighing values after
pressing PRINT key
Generic printer Not documented
Printer Tlp Not documented
On demand - Glp
GLP conformant printouts after pressing
the PRINT button
Generic print. - Glp Not documented
Printer Tlp - Glp Not documented
 Take over selection using the PRINT button.
Weighing balance returns to menu. Either make more settings in the menu or go
back to weighing mode as follows.
 Press the MENU button and keep it pressed until the acoustic signal gets mute.
The balance returns automatically into weighing mode.