KERN & SOHN ALT 250-4B - Manual (Page 73)

ALT_B-PLT_A-PLT_F-BA-e-1333 73
 Use the navigation buttons  to enter the required multiplication factor.
1 = simple receipt quantity
2 = double receipt quantity
3 = triple receipt quantity
etc.
 Use the PRINT button to confirm the selected factor:
Example for factor 1
1 Tolerance value
2 Total weight of all components
3 Nominal value of the component
4 Total weight of all components
5 Displaying tolerance
Overview tolerance display:
Ex.: tolerance -10.0 % to +5.0 %
Weighed good below nominal value
Weighed good = nominal value
Weighed good above nominal value
Ex.: without tolerance entry:
Weighed good below nominal value
Weighed good = nominal value
Weighed good above nominal value