KERN & SOHN MLB 50-3C User Manual

Operating manual electronic moisture analyser, Kern mlb_c, Kern & sohn gmbh

KERN & Sohn GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: [email protected]

Phone: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

Operating manual
Electronic Moisture Analyser

KERN MLB_C

Version 3.1
03/2014

MLB_C-BA-e-1431

Table of contents

Document Outline

1 Technical data
- 1.1 Dimensions
2 Device overview
- 2.1 Keyboard overview
- 2.2 Display overview (during measurement)
3 Basic Information (General)
- 3.1 Proper use
- 3.2 Improper Use
- 3.3 Warranty
- 3.4 Monitoring of Test Resources
4 Basic Safety Precautions
- 4.1 Pay attention to the instructions in the Operation Manual
- 4.2 Personnel training
- 4.3 Danger Information
5 Transport and storage
- 5.1 Testing upon acceptance
- 5.2 Packaging / return transport
6 Unpacking, Setup and Commissioning
- 6.1 Installation Site, Location of Use
- 6.2 Unpacking and assembly
  - 6.2.1 Scope of delivery
- 6.3 Mains connection
- 6.4 Switch on/switch off device
- Stability display
- Balance zero display
- 6.5 Connection of peripheral devices
- 6.6 Initial Commissioning
7 Weigh/tare
8 Menu
9 P1 CAL - adjustment
- 9.1 P1-01 External adjustment
- 9.2 P1-02 Adjustment test
- 9.3 P1-03 Temperature adjustment
- 9.4
- 9.5 P1-04 Adjustment record print-out
- 9.6 P1-05 temperature calibration
10 P2 GLP (Good laboratory practice)
11 P3 Setting date/time
12 P4 Basic settings
13 P5 RS 232 interface
14 P6 Other useful functions
15 Operator menu – moisture analysis
- 15.1 Moisture analysis without using the program library
- Setting drying parameters
- How to implement drying
- 15.2 Moisture analysis using the program library
- Activate program library “P6-01-Libr”
- Setting drying parameters
- Select drying parameters and carry out drying
16 General information concerning moisture analysis
- 16.1 Application
- 16.2 Basics
- 16.3 Adjustment to existing measuring method
- 16.4 Preparing a sample
- 16.5 Sample material
- 16.6 Sample size / originally weighted in quantity
- 16.7 Drying temperature
- 16.8 Recommendations / Guidelines
17 Data output
- 17.1 Remote control instructions
18 Servicing, maintenance, disposal
- 18.1 Cleaning
- 18.2 Change fuse
- 18.3 Servicing, maintenance
- 18.4 Disposal
19 Instant help
20 Declaration of Conformity