KERN & SOHN AEJ 200-4CM User Manual

Operating manual analytical precision balance, Kern aej-c/aes-c/plj-c, Kern & sohn gmbh

Text mode
Original mode

KERN & Sohn GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: [email protected]

Phone: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

Operating manual
Analytical Precision Balance

KERN AEJ-C/AES-C/PLJ-C

Version 1.2
09/2014
GB

AEJ-C/AES-C/PLJ-C-BA-e-1412

This manual is related to the following products:

AEJ 100-4CM AEJ 200-5CM AES 200-4C AES 100-4C

Table of contents

Document Outline

1 Technical data
- 1.1 Dimensions
2 Appliance overview
- 2.1 Display and Keyboard Summary
  - 2.1.1 Navigation buttons / numeric input
3 Basic instructions
- 3.1 Proper use
- 3.2 Improper Use
- 3.3 Warranty
- 3.4 Monitoring of Test Resources
4 Basic Safety Precautions
- 4.1 Pay attention to the instructions in the Operation Manual
- 4.2 Personnel training
5 Transport and storage
- 5.1 Testing upon acceptance
- 5.2 Packaging / return transport
6 Unpacking, Setup and Commissioning
- 6.1 Installation Site, Location of Use
- 6.2 Unpacking and checking
- 6.3 Placing
- 6.4 Mains connection
  - 6.4.1 Turning On the Power
- 6.5 Connection of peripheral devices
- 6.6 Initial Commissioning
7 Adjustment
- 7.1 Automatic adjustment with internal weight (only AEJ-C and PLJ-C)
- 7.2 Menu settings
- 7.3 Verification
8 Menu
- 8.1 Navigation in the menu
- 8.2 Menu overview
- 8.3 Exit menu / back to weighing mode.
9 Entry by navigation keys
10 User
- 10.1 Login/logout
- 10.2 Authorisation levels
11 Weighing
- 11.1 Switch on-off balance
- 11.2 Weighing
- 11.3 Weighing units switch-over
- 11.4 Taring
  - 11.4.1 Entering a tare value manually (pre-tare)
  - 11.4.2 Deleting the tare value
- 11.5 Underfloor weighing
- 11.6 Selecting the operating mode
  - 11.6.1 Invoking operating modes:
  - 11.6.2 To select operating modes:
12 Weighing scale settings operating mode weighing
- 12.1 Filter - adaptation to ambient conditions and weighing options
- 12.2 Rest position control
- 12.3 Auto Zero
- 12.4 Hide last decimal place
- 12.5 Environmental conditions
- 12.6 Print mode
- 12.7 Setting weighing units
  - 12.7.1 How to enable weighing units
  - 12.7.2 How to set a standard weight unit
- 12.8 Information display
  - 12.8.1 Special information
  - 12.8.2 Shortcut keys
13 Additional operating modes
- 13.1 Parts counting
- 13.2 Weighing with tolerance range
- 13.3 Dosing
- 13.4 Percent determination
- 13.5 Animal weighing
- 13.6 Statistics
- 13.7 Totalization
- 13.8 HOLD function
14 Further useful functions “P6 OTHER“
- 14.1 Language
- 14.2 Authorisations
- 14.3 Acoustic signal for key operation
- 14.4 Backlight and brightness control for display
- 14.5 Date
- 14.6 Time
- 14.7 Date format
- 14.8 Time format
15 GLP/ISO report “P5.3 GLP PRINT“
16 Data output RS 232 and USB
- 16.1 Technical data
- 16.2 Setting interface RS 232
- 16.3 Interface cable
- 16.4 Output log
  - 16.4.1 Issue after pressing the PRINT ´button
  - 16.4.2 Remote control instructions
17 Connecting external devices
- 17.1 Printer settings
18 Data bases
- 18.1 Data base USER
- 18.2 Data base products
- 18.3 Data base Taring
- 18.4 Data base Weighing processes
- 18.5 Alibi memory
- 18.6 Exporting and importing data bases
19 Servicing, maintenance, disposal
- 19.1 Clean
- 19.2 Servicing, maintenance
- 19.3 Disposal
20
21 Instant help
- 21.1 Error messages
22 Declaration of conformity