KERN & SOHN ALT 250-4B - Manual (Page 51)

ALT_B-PLT_A-PLT_F-BA-e-1333 51
11.12 Adjustment mode
 In weighing mode press the MENU button and keep it pressed until the acoustic
signal gets mute. The setup menu is displayed.
 Use the navigation buttons  to select the menu item „Calibration mode“.
 Acknowledge using PRINT button, the current setting is displayed.
 Use the navigation buttons  to select the desired setting.
! In models PLT-M only automatic adjustment is available.
Display Description Procedure see chap.
Internal
adjustm.
Adjustment with internal
weight after pressing the
CAL button
+
Chap. 7.1
External
adjustm.
Adjustment with external
adjustment weight
+
Chap. 7.3
Technical
adjustm.
Overwrite internal
adjustment weight
+
Chap. 7.4
Autom. adjustm.
Automatic adjustment with
internal adjustment weight
+
Chap. 7.2
+ or 8.1 (PLT-M)
 Take over selection using the PRINT button.
Weighing balance returns to menu. Either make more settings in the menu or go
back to weighing mode as follows.
 Press the MENU button and keep it pressed until the acoustic signal gets mute.
The balance returns automatically into weighing mode.