KERN & SOHN ALT 250-4B - Manual (Page 58)

58 ALT_B-PLT_A-PLT_F-BA-e-1333
12.1.2 Numeric entry of the reference weight
If the piece weight (reference) is known, it can be entered directly. As the balance in
this method needs not to calculate any reference, the balance after confirming the
reference piece weight will be directly in parts counting mode.
 In weighing mode press MENU button. The master menu will be displayed.
 Use the navigation buttons 
to select the menu item „Piece counting“.
 Acknowledge using PRINT button, the currently set reference quantity is
displayed.
 Use the MENU button to select the „Manual“ setting.
 Confirm by pressing the PRINT button.
 Use the navigation buttons (see chap. 2.2.1) to enter the known reference piece
weight in grams. To set a decimal point press the CAL button long time. The
input is deleted by pressing the TARE button a longer time.
 Confirm by pressing the PRINT button.
From here on the balance is in parts counting mode and counts all pieces which are
placed on the weighing pan (see chap.10.1.1
„Carry our parts counting“).
If the minimum parts weight is not reached, an error message will appear. Use the
ON/OFF button to return to the weighing mode and restart the procedure.
Return to weighing mode
 Press the ON/OFF key