Canon CEL-SE65A210 - Manual (Page 67)

64
Using the Built-In Flash
Use the flash according to the guidelines below.
* No icon appears on the display panel.
• For information on the external flash, see page 180.
Mode Dial
*
Auto with red-eye
reduction
The flash fires automatically as required by
the lighting level, and the red-eye reduction
lamp fires each time the main flash fires.
* Auto
The flash fires automatically as required by
the lighting level.
*
Flash on with red-
eye reduction The red-eye reduction lamp and the flash
always fire.
Flash on The flash always fires.
Flash off The flash does not fire.
1
Press the button to switch
between flash modes.
z The selected flash mode appears on the
display panel. It will also be displayed on
the LCD Monitor if the monitor is on.
z You can switch between settings by
pressing the button. Some settings are
not available with certain shooting modes
(p. 206).
When the red-eye reduction function is
on (p. 65)
When the red-eye reduction function is
off (p. 65)
EC140CUG_Eng.book Page 64 Thursday, July 29, 2004 3:16 PM