Canon CEL-SE65A210 - Manual (Page 110)

107
Sh
oo
ting
– Sel
e
ct
in
g Pa
rt
icu
la
r Ef
fec
ts
Locking the Flash Exposure Setting
(FE Lock)
You can obtain the correct exposure with flash photography
regardless of the location of your subject in the composition.
Mode Dial
1
Press the DISPLAY button to turn the LCD monitor
on.
2
Press the (Flash) button and set the flash to fire
(p. 64).
z If you are using an externally mounted flash, please refer to its
manual for setting instructions.
3
Focus the AF frame or the spot metering frame on
the subject on which you wish to lock the flash
exposure setting and press the shutter button
halfway.
4
While pressing the shutter button halfway, press the
button.
z The exposure setting locks (FE lock) and the icon appears on
the LCD monitor.
z The flash will fire a pre-flash and lock the flash exposure to the
required intensity to illuminate the subject.
z Each time you press the button, the flash exposure fires a
pre-flash and locks at the required intensity for that composition.
z Using any button or lever other than the main dial cancels the FE lock.
5
Recompose the image and shoot.
EC140CUG_Eng.book Page 107 Thursday, July 29, 2004 3:16 PM