Canon CEL-SE65A210 - Manual (Page 39)

36
Confirming information on the LCD
Monitor
Information Displayed on the LCD Monitor
The LCD monitor displays information in Shooting or Playback
mode, such as the camera settings, remaining image capacity and
shooting date/time.
z Shooting Mode
Settings which have been altered will be displayed on the LCD
monitor for approximately six seconds, even if the information
display has been turned off. (Sometimes no information appears
depending on the camera setting at that time.)
z A slow shutter speed has likely been selected because of
insufficient lighting if the camera shake icon
appears on the
LCD monitor after metering preparations are complete. Set the
flash to (On) or
(Auto), or affix the camera to a tripod to
shoot.
z After you take a photo by fully pressing the shutter button, the
image displays on the LCD monitor for approximately two
seconds (or the review duration you set from 2 to 10 seconds).
If you press the SET button or
button while the image is
displayed, it will continue to display (p. 57).
z You can check the brightness of the image during the image
review after shooting using the histogram (p. 40), a graph which
allows you to judge the brightness of the recorded image and
other information appearing with the image. You can adjust the
exposure according to the results, then shoot again if necessary.
(If no histogram appears, press the DISPLAY button.)
EC140CUG_Eng.book Page 36 Thursday, July 29, 2004 3:16 PM