Canon CEL-SE65A210 - Manual (Page 59)

Auto Mode (continued)
56
z If the LCD Monitor is on, the AF frame(s)
will be displayed in green.
z The shutter speed and aperture value are
automatically determined and show on
the display panel. The shutter speed and
aperture will also be displayed on the
LCD Monitor if the monitor is on.
z If the camera is having difficulty focusing,
one beep will sound and the lamp will
blink yellow. The AF frame(s) will also be
displayed in yellow when the center-point
AF frame is selected.
6
Press the shutter button all the way (p. 43).
z You will hear the sound of the shutter when the shutter activates.
z If the LCD Monitor is on, the images you have just shot will be
displayed on the monitor for around two seconds.
z See page 206 for settings that can be changed in this mode.
z With the Review function, you can change the length of time
images appear on the LCD monitor after shooting, or set it so
they do not appear at all (p. 57).
AF Frame
EC140CUG_Eng.book Page 56 Thursday, July 29, 2004 3:16 PM