Canon CEL-SE65A210 - Manual (Page 153)

Selecting Images for Transferring (continued)
150
3
Select images for transferring.
Single Images
z
Select an image using the main dial or
the W or X arrow on the omni selector
and mark or remove marks from images
using the S or T arrow on the omni
selector. A check mark appears on the
marked image.
z You can use the same procedures
to select images in index playback
(3 images). Press the
button to
switch between single image playback
and index playback.
All the Images on a CF Card
z
Press the button to switch to index
playback (3 images).
z Then press the SET button, and select
[Mark all] using the S or T arrow on the
omni selector and press the SET button
again. (If you select [Clear all] instead of
[Mark all], you can remove marks from all
the images.)
z You can select images using the main
dial or the W or X arrow on the omni
selector and change the settings using
the S or T arrow on the omni selector
after [Mark all] or [Clear all] has been
selected.
4
Press the MENU button.
z The selection mode will turn off and the Transfer Order menu will
reappear.
z Images are transferred in order from oldest to newest by the
shooting date.
z A maximum of 998 images can be marked per CF card.
EC140CUG_Eng.book Page 150 Thursday, July 29, 2004 3:16 PM