Canon CEL-SE65A210 - Manual (Page 61)

Reviewing an Image Right after Shooting (continued)
58
Changing the Recording Format Right after
Shooting
By following the instructions below, you can save images shot in the
JPEG format in the RAW format (p. 62) right after shooting.*
You can easily process images saved in the RAW format using a
computer to edit the resolution, photo effect and white balance
without any loss of quality.
* The JPEG format image will not be saved.
2
Select a Review setting and press the
MENU button.
z [Off]: The image will not automatically
display.
z [2 sec.] to [10 sec.]: The image will
appear for the time selected even if the
shutter button is released.
z You can continue to display the image as
long as the shutter button is held down
regardless of the Review setting.
z Another picture can be taken by pressing
the shutter button even while the last is
displayed.
Mode Dial
1
Right after shooting, press the button while the image
is displayed on the LCD monitor.
EC140CUG_Eng.book Page 58 Thursday, July 29, 2004 3:16 PM