Canon CEL-SE65A210 User Manual
Page 163
160
A video-compatible television connected via the supplied AV Cable
AVC-DC300 can be used to view images as you shoot or replay them.
Viewing Images on a TV Set
1
Turn off the camera and the TV (p. 31).
2
Attach AV Cable AVC-DC300 to
the A/V OUT terminal on the
camera.
3
Plug the other ends of the AV
cable to the video in and audio in
jacks on the TV.
4
Turn on the TV and switch it to Video mode.
5
Turn the mode lever to
or
(p. 30).
z
The image will appear on the TV. Shoot or play back images as
usual.
z
No image will appear on the LCD monitor when the camera is
connected to a TV monitor.
z
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 52). The default
setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will not
display properly.
z
If the TV is a stereo model, you can plug the audio plug into
either the left or right Audio In jack. Please refer to the TV’s
manual for details.
z
A TV set cannot be used in
mode.
To the Video
In Jack
To the Audio
In Jack
Black
Plug
Yellow
Plug
EC140CUG_Eng.book Page 160 Thursday, July 29, 2004 3:16 PM