Canon CEL-SE65A210 User Manual
Page 190
187
Ap
pe
nd
ix
Mounting the Lenses
z
You are recommended to use Macro Ring Lite MR-14EX or
Macro Twin Lite MT-24EX for flash photography with the
close-up lens mounted on the camera. (If you plan to attach
Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX, first
attach Macro Lite Adapter 58C (sold separately) to Close-up
Lens 250D.)
z
When using the built-in flash to shoot, a portion of the image in
the viewfinder may appear to be blocked by the wide converter
or tele-converter and appear dark.
z
When using the viewfinder to shoot, a portion of the image in the
viewfinder may appear to be blocked by the wide converter or
tele-converter.
1
Turn the power off and press the
ring release button and remove
the ring from around the lens on
the camera body.
2
Attach the conversion lens
adapter to the camera by aligning
the part of the adapter marked (A)
with the ring release button, then
rotating it until the
mark.
z
To remove the conversion lens adapter,
hold down the ring release button and
turn the adapter in the opposite direction
shown.
Ring Release Button
Ring
EC140CUG_Eng.book Page 187 Thursday, July 29, 2004 3:16 PM