Canon CEL-SE65A210 - Manual (Page 139)

Automated Playback (Slide Show) (continued)
136
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1 – 3. Up to 998
images may be marked per slide show. Images display in the order
of their selection.
4
When the slide show is over, press the MENU button.
z The slide show menu appears again. Press the MENU button
again to close the menu.
z Movie images play for the length of time that they were recorded
regardless of the time set in the slide show settings.
z The power saving function is disabled while a slide show plays
on the camera (p. 31).
1
Display the slide show menu
(p. 135).
2
Press the S arrow on the omni
selector to select [Program].
Press the W or X arrow to select
[Show 1], [Show 2] or [Show 3].
z A check mark will appear beside a show
already containing images.
3
Press the T, and W or X arrow on the omni selector
to choose [Select] and press the SET button.
4
Mark images to include in the
show.
Single Image Playback
z
Move between images using the main
dial or the W or X arrow on the omni
selector and mark or remove marks from
images using the S or T arrow on the
omni selector.
z The selection number and a check mark
appear at the top of selected images.
EC140CUG_Eng.book Page 136 Thursday, July 29, 2004 3:16 PM