Canon CEL-SE65A210 - Manual (Page 112)

109
Sh
oo
ting
– Sel
e
ct
in
g Pa
rt
icu
la
r Ef
fec
ts
Switching between Flash Adjustment
Settings
The built-in flash and the externally mounted flash* fire with
automatic flash adjustments (except in the M mode), but it is
possible to set them so that they fire without any adjustments.
* Speedlite 220EX/420EX/550EX/580EX, Macro Ring Lite MR-14EX, Macro
Twin Lite MT-24EX
Compensating the Flash Adjustment/Flash Output
Mode Dial
1
Select [Flash Adjust] from the [ (Rec.)] menu.
z See Selecting Menus and Settings (p. 46).
2
Select [Auto] or [Manual] and press the MENU
button.
Mode Dial
Flash Adjust
z When [Flash Adjust] is set to [Auto], settings can be
adjusted in 1/3-stop increments in the range of –2 stops
to +2 stops.
z You can combine flash exposure compensation with the
camera’s exposure compensation function for ambient
light to achieve creative effects.
Flash Output
z In M mode or when [Flash Adjust] is set to [Manual], the
flash output can be controlled in three steps, starting
from FULL, when shooting. This setting is also effective
for slave flash photography where multiple flashes are
fired at the subject from different positions because the
pre-flash does not fire. When an externally mounted
flash is attached, its flash output can be controlled (Up to
1/16 from Full, in 1/3 steps).
EC140CUG_Eng.book Page 109 Thursday, July 29, 2004 3:16 PM