Canon CEL-SE65A210 - Manual (Page 105)

Auto Exposure Bracketing (AEB Mode) (continued)
102
3
Select (LCD monitor) or
(Display Panel) using the
main dial or the W or X arrow on
the omni selector, then press the
SET button.
z The compensation range cannot be
adjusted when the LCD monitor is off,
even if you press the SET button. AEB
operations are carried out with the
currently selected compensation range.
Press the FUNC. button to end the
operation.
4
Expand or contract the range
using the main dial or the W or X
arrow on the omni selector.
z Use X to expand the range and W to
contract it.
z The camera returns to the Step 3 screen
if you press the SET button.
z You can shoot the image right after
selecting settings by pressing the shutter
button. The menu displays again after the
shot, allowing you to change the settings
easily.
5
Press the FUNC. button or click the main dial.
z Select or in Step 3 to cancel AEB mode.
z The AEB mode is not available when shooting with the flash on.
The camera will revert to shooting only one image when the flash
is on.
EC140CUG_Eng.book Page 102 Thursday, July 29, 2004 3:16 PM