Canon CEL-SE65A210 - Manual (Page 175)

172
Image is blurred
or out of focus Camera moved z Be careful not to move the
camera when pressing the
shutter button.
z Use a tripod at slow shutter
speeds when the camera
shake warning
appears.
Autofocus function
hampered by
obstruction to AF-assist
Beam z Be careful not to block the
AF-assist Beam with your
finger or other items.
AF-assist Beam is set
to off z Set the AF-assist Beam
to [On].
JSee Rec. Menu (p. 48).
Subject out of focal
range z Ensure that there is at least
50 cm (1.6 ft.) between the
camera lens and subject.
z Use the (Macro) mode to shoot
close-ups between 5 and 50 cm
(2.0 in. and 1.6 ft.) at maximum
wide angle and 15 and 50 cm
(5.9 in. and 1.6 ft.) at maximum
telephoto.
z You can also use Super Macro
mode when the distance to the
subject is 5 to 20 cm (2.0 to
7.9 in.) (wide angle end to
86 mm*).
* Zoom position (35mm film
equivalent)
Subject is hard to focus
on z Use the focus lock or the
manual focus to shoot the
image.
z See Shooting Problem Subjects
for the Autofocus (p. 114).
Subject in
recorded image is
too dark Insufficient light for
shooting z Set the built-in flash to on.
z Use a high-output externally
mounted flash.
Problem Cause Solution
EC140CUG_Eng.book Page 172 Thursday, July 29, 2004 3:16 PM