Canon CEL-SE65A210 - Manual (Page 148)

145
Pr
in
t Or
de
r,
Tr
an
sf
er
rin
g
3
Select images for printing.
Single Images
z
When the print type (p. 146) is set to
[Standard] or [Both], select an image
using the main dial or the W or X arrow
on the omni selector. You can set the
number of copies (up to 99) to be printed
using the S or T arrow on the omni
selector.
z When the print type (p. 146) is set to
[Index], select an image using the main
dial or the W or X arrow on the omni
selector and mark or remove marks from
images using the S or T arrow on the
omni selector. A check mark appears on
the marked image.
z You can use the same procedures to
select images in index playback (3 images). Press the
button
to switch between single image playback and index playback.
All the Images on a CF Card
z
Press the button to switch to index
playback (3 images).
z You can set one copy of each image to
print by pressing the SET button, then
selecting [Mark all] using the S or T
arrow on the omni selector, and pressing
the SET button again.
z When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print
settings can be deleted. For the
instructions on changing settings, please
reread Step 3 from the beginning.
z You can cancel all the settings by
selecting [Clear all].
4
Press the MENU button.
z The selection mode will turn off and the Print Order menu will
reappear.
Number of
Copies
EC140CUG_Eng.book Page 145 Thursday, July 29, 2004 3:16 PM