Interlogix XL LCD Keypad Plus Regional Settings Guide User Manual
Page 62
xL Regional Settings Guide
21-3609E rev1.0
58
A0xx
È06
Area User Counters
Keypad Selections
“xx” represents the area number.
WARNING:
These Access Control features are only available with the addition of the “Feature Expansion Board”.
(left to right on keypad screen)
Name
Selections
Description
Regional Settings Default
N America
00000
European 00000
U.K. ACPO
00000
Aus/NZ 00000
China/H.K. 00000
Netherlands 00000
Switzerland 00000
Maximum Area
Counter
0 – 16383
Maximum number of users
counted in an area before an
“area full” condition occurs.
France 00000
N America
00
European 00
U.K. ACPO
00
Aus/NZ 00
China/H.K. 00
Netherlands 00
Switzerland 00
Minimum Area
Counter
0 – 15
Minimum number of users
counted in an area before an
“area empty” condition occurs.
France 00
N America
0
European 0
U.K. ACPO
0
Aus/NZ 0
China/H.K. 0
Netherlands 0
Switzerland 0
Reset Before
Schedule in Effect
1 – 7
0 = Not used,
1 = 1hr prior...
2 = 2hr prior..
3 = 3hr prior.
4 = 4hr prior.
5 = 5hr prior.
6 = 6hr prior.
7 =7 hrs prior to In Schedule Time
User count resets to “0” at the
time selected before the area’s
schedule starts.
NOTE:
there must be a
schedule assigned to the area.
France 0
N America
0
European 0
U.K. ACPO
0
Aus/NZ 0
China/H.K. 0
Netherlands 0
Switzerland 0
“Users in Area”
Counts Increase or
Decrease
(Count
Mode)
0 = “Normal”: the user count for the
area being entered will increase
and the area being exited will be
decreased.
1 = “User Area Based”: the user
count for the area being entered
will increase and the last known
area the user was in will be
decreased.
2= Blind mode
Selection “1” NOTE: If “Timed
Anti-pass Back” is selected and
the timer expires, information
about the area the user was last
in will not exist. The user count
for the area they just came from
will be decreased.
France 0
N America
□ (no)
European
□ (no)
U.K. ACPO
□ (no)
Aus/NZ
□ (no)
China/H.K.
□ (no)
Netherlands □ (no)
Switzerland
□ (no)
Reset On Disarm To
Off
9
(yes)
□
(no)
User count resets to “0” when
the area is turned off.
France
□ (no)
N America
□ (no)
European
□ (no)
U.K. ACPO
□ (no)
Aus/NZ
□ (no)
China/H.K.
□ (no)
Netherlands □ (no)
Switzerland
□ (no)
Reset On Arm To On
9
(yes)
□
(no)
User count resets to “0” when
the area is turned on.
France
□ (no)