Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 50)

xL Regional Settings Guide 21-3609E rev1.0 46
S005 È08 Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
N America 0
European 0
U.K. ACPO
0
Aus/NZ 0
China/H.K. 0
Netherlands 0
Switzerland 0
Paging Mode 0 = None
1 = Numeric SemaDigit w/ HS
2 = Blind SemaDigit
3 = SemaPhone (future) Also see S001:06, 07
France 0
N America
□ (no)
European □ (no)
U.K. ACPO □ (no)
Aus/NZ □ (no)
China/H.K. □ (no)
Netherlands □ (no)
Switzerland
□ (no)
Paging Output Data 9
(yes)
□
(no)
Also see S001:06, 07
□
(no) On-board telco modem
9
(yes) Host port 56K modem
France □ (no)
S005 È09 Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
Paging Phone
Number (16 characters) Also see S001:06, 07
Paging phone number the system will dial to
transmit reports.
The phone number can be preceded with P =pulse
dialing (default), or T =Tone dialing, and can include D
=2 sec Delay, A =Star key (tone dialing), # = Pound Sign
(tone dialing), and/or W = Wait for second dial tone. For
T
one dialing, ensure the phone line supports this.
Blank
S005 È10 Keypad Selections
(left to right on keypad screen) N. America Example:
Name
Selections Description Regional Settings Default
Main Control Board
Address
(Panel Serial
Number) Up to 5 digits, 0 = Undefined, 1 –
65534 = Director software
connection, 65535 = Special
Debug Mode This is the serial number of the
main control board that is
automatically assigned. 000000
N America 0
European 0
U.K. ACPO
0
Aus/NZ 0
China/H.K. 0
Netherlands 0
Switzerland 0
Main Control Board
Connection Type For viewing only. These
selections are only done at the
Director software and not entered
here. They appear automatically in
this selection when the software
first communicates with the main
controller board.
0: Direct-Cable
1: External Modem
2: Internal Modem – Bell 103
3: IP
4: WW 56K Modem
5: Internal World Wide Modem
(2400 bps)
This specifies the type of
connection to a Director
software PC.
France 0
N America 0
European 0
U.K. ACPO
0
Aus/NZ 0
China/H.K. 0
Netherlands 0
Switzerland 0
Main Control Board
Reporting Mode 0: No Main Control Board
reporting;
1: Blocks of 256 events;
2: Alarms (indiv. / small blocks) Whether or not alarms or blocks
of events will be auto-
transmitted to the Director
software.
Available with xL using IP.
France 0
N America
0
European 0
Main Control Board
Shared phone line 0= Not shared, 1= Preemptive
always, 2= User intervention
required w/ time, 3= Timed
U.K. ACPO 0
00000 · 0 · 0 · 0 · 0 · 0 ·
È Save S005 И 10