Interlogix NX-1700E User Manual
Symbol legend, Ordering information

NX1700EIG05
(Supercedes NX1700EIF04)
NX-1700E Proximity Card Reader
Installation and Startup
© 2012 UTC Fire & Security
All rights reserved. Printed in the United States of America.
NetworX
is a trademark of the UTC Fire & Security.
These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to be met during installation,
operation, and maintenance. If further information is desired or if particular problems arise that are not covered sufficiently for the purchaser’s
purpose, the matter should be referred to UTC Fire & Security, Gladewater, Texas, USA.
This document contains proprietary information of UTC Fire & Security, USA and is furnished to its customer solely to assist that customer in the
installation, testing, operations, and/or maintenance of the equipment described. This document shall not be reproduced in whole or in part nor shall
its contents be disclosed to any third party without the written approval of UTC Fire & Security.
Please refer to the current UTC Fire & Security product catalog for detailed warranty information.
Main 800-727-2339
Technical
Support
888-437-3287
Outside the US
903-845-6941
Sales & Literature
800-547-2556
Main Fax
903-845-6811
W
Symbol Legend
Warning
Indicates a procedure, practice, condition, or statement that, if not strictly observed, could result in personal
injury.
* This symbol indicates electrical warnings and cautions.
Caution
Indicates a procedure, practice, condition, or statement that, if not strictly observed, could result in damage to or
destruction of equipment or property.
** This symbol indicates general warnings and cautions.
Note
Indicates an essential or important procedure, instruction, condition, or statement.
Tip
Indicates a user tip. Provides helpful information that is not normally defined in regular use, but from an
experienced user.
Enter
Indicates a key or button should be pressed to enter data.
ORDERING INFORMATION
PART #
DESCRIPTION
PART #
DESCRIPTION
NX-1700E
Card Reader Module
NX-216E
16 Zone Expander Module
NX-8E
8 – 192 Zone Control Only
NX-320E
Smart Power Supply and Buss Extender
NX-848E-KIT NX-8E Control, NX-148E LCD Keypad, 40VA
Transformer
NX-408E
8 Zone Wireless Expansion Module
NX-8
8 – 48 Zone Control Only
NX-416E
16 Zone Wireless Expansion Module
NX-848-KIT
NX-8 Control, NX-148E LCD Keypad, 40VA
Transformer
NX-448E
48 Zone Wireless Expansion Module
NX-6
6 – 12 Zone Control Only
NX-507E
Seven Relay Module
NX-648-KIT NX-6 Control, NX-148E LCD Keypad, 40VA
Transformer
NX-508E
Eight Output Module
NX-148E
Alphanumeric 48 Zone LCD Keypad
NX-534E
Two-Way Listen In Module
NX-1192E
192 Zone LCD Keypad
These units are UL listed for residential use only.
Document Outline
- Warning
- Caution
- Note
- Tip
- Enter
- NX-1700E
- NX-8E
- NX-848E-KIT
- I. GENERAL DESCRIPTION
- II. INSTALLATION AND WIRING
- III. ENROLLING
- ADDRESSING
- V. PROGRAMMING
- VI. USER CARDS
- VII. PROGRAMMING LOCATIONS
- Location 0 Programming the Scan Functions
- Segment 1 Single Scan Function {Single Beep}
- Segment 2 Double Scan Function {Double Beep}
- Segment 3 Single Scan Hold Function {Triple Beep}
- Location 241 Programming the X-10 Address for the Scan Functions
- Location 242 Programming the Options and Reader Partition
- Location 243 Programming the Zones
- Location 244 Programming the Various Reader Timers
- Location 245 Resetting the Reader Address
- Location 246 Programming the Access Options
- Location 247 Programming the Opening Time for Schedule 1
- Location 248 Programming the Closing Time for Schedule 1
- Location 249 Programming the Days for Schedule 1
- Locations 250 - 270 Programming the Schedules 2 - 8
- Location 271 Programming the Date of Holidays in January
- Locations 272 - 282 Programming the Date of Holidays from February to December
- Location 284 Programming Activation Data for User Cards 121 through 240
- Location 285 Code Entry Logging Partition
- Location 0 Programming the Scan Functions
- PROGRAMMING WORKSHEETS
- IX. GLOSSARY
- X. FCC INFORMATION
- XI. UNDERWRITERS LABORATORIES INFORMATION
- XII. SPECIFICATIONS