Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 45)

21-3609E rev1.0 xL Regional Settings Guide 41
S004 È01 Secondary Card Format—Site Codes
Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
1st Site Code
Value 0000 – 9999 The 1st of up to three site/system codes
that can be encoded within access
tokens to be used at the site. 0000
2nd Site Code
Value 0000 – 9999 The 2nd of up to three site/system codes
that can be encoded within access
tokens to be used at the site. 0000
3rd Site Code
Value 0000 – 9999 The 3rd of up to three site/system codes
that can be encoded within access
tokens to be used at the site. 0000
If site code checking is enabled for a secondary card/token format, cards encoded with any one of up to three site code values can be used at the
site. (All other cards will be globally denied access.)
S004
È02 Card Version-Information (Secondary)
Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
Check for
Version No. 9
(yes)
□
(no)
Whether or not secondary-format tokens
will be checked for a current version
number. † (no)
Version No.
Position 1 – 40 The position of the 1st digit for the
version number on these access tokens. 02 (U.K. ACPO = 01)
Version No.
Length 1 – 16 The length of the version number for
secondary-format tokens (number of
digits). 04 (U.K. ACPO = 01)
This feature requires V1.5 door/elevator controller firmware.
S004
È03 Secondary Card Format—Basic Settings
Keypad Selections
(left to right on keypad screen) Example:
Name
Selections Description Regional Settings Default
ID Number
Position 1 – 40 The position of the 1st digit for the ID
number on secondary-format access
tokens. 10 (U.K. ACPO = 07)
ID Number
Length 1 – 32 The length of the card ID-number for
secondary-format tokens. 16 (U.K. ACPO = 06)
No. of Bits /
Chars 1 – 40 The total number of bits (Wiegand) or
characters (Magstripe) in the card data. 26 (U.K. ACPO = 12)
Bits per
Character 1 – 8 The number of bits used to represent
each character (for magnetic stripe
cards). 8 (U.K. ACPO = 4)
Card/Token
Format 0=none, 1=future
(dallas), 2=weigand,
3=mag The basic type of card or token
associated with the secondary card
format settings. 2 (U.K. ACPO = 3)
32-Bit / 9-Digit Card IDs: This requires V1.5 door/elevator controller firmware.
10 · 16 · 26 · 8 · 2 ····
È Save S004 И 03