Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 116)

112 xL Regional Settings Guide 21-3609E rev1.0
• The Date of the Pin of the Day program and the
site’s system date on its keypad must be the same.
UK ACPO Pin of the Day
• When a UK system is started up for the first time
and the new system initialization (explained in
Simplified Installation Guide: “Powering On the
System for the First Time”) is done selecting UK as
the region, the service and master user will need to
log on to silence the system.
• After which, the date and time will display on the
keypad for entering.
• After the date and time are entered and e.g. a
service user has to log on to do programming at the
keypad, as soon as they enter their ID, Pin of the
Day will be requested.
• The service user will call the Pin of the Day
program operator who can enter default “24822” as
the new system’s default Dealer ID until a unique
one can be entered at the keypad or downloaded
from the Director software later.
• The service user enters random, 6 digit Pin of the
Day number given to them by the operator at the
keypad and can then access the system menus
and configurations.