Futaba 14MZ - Manual (Page 87)

AIRBRAKE
ELEVATOR
ELEVATOR 2
V-TAIL
ELEVATOR ELEVATOR 2
AIL EVATOR
●Return to Model Menu
Airbrake to ELE [Corresponding model type]: Airplane/glider, general
This mixing is used when you want to mix
the elevators with airbrake (spoiler) operation. It
raises the elevators to correct for drooping of the
nose during airbrake operation.
*This function does not operate when airbrake is not assigned
at the Function menu in the Linkage Menu.
● The Rate 1 side/Rate 2 side mixing rate with the
elevator servos can be adjusted.
● A mixing curve can be set.
● Mixing during fl ight can be turned ON/OFF by
setting a switch. (Always ON at NULL setting)
● The mixing rate can be fi ne-tuned by setting a VR.
● Touch the [Airbrake to ELE] button in the Model Menu
to call the setup screen shown below.
● Mixing curve setting
(For a description of the curve setting method, see the
description at the back of this manual.)
● Fine tuning VR setting
●Curve display mode switching
(Single/Fine tuning/All Cond.)
● Left/right overall
a d j u s t m e n t b y
Rate A and Rate B
Setting method
● Touch the "INH" button and set the function to ACT
(ON).
● When setting a switch, touch the [NULL] button
to call the screen, and then select the
switch and set its ON direction. (Always ON at
"NULL" setting)
(For a description of the switch selection method,
see the description at the back of this manual.)
● When setting a VR, touch the Fine tuning "NULL"
button to call the screen, and then
select the VR. The adjustment rate and direction
can be set.The VR operation mode can also be
set.
(For a description of the fi ne tuning VR setting
method, see the description at the back of this
manual.)
● A mixing curve can be set.
(For a description of the curve setting method,
see the description at the back of this manual.)
● The curve display mode can be set.
●Group/single mode switch (Gr./Sngl)
(For more information, see the description at the back of this manual.)
Single : Displays the mixing curve only
Fine tuning : Displays the adjustment rate of the
fi ne tuning VR
All Cond. : Displays the mixing curve of all the
conditions. (When conditions are set)
87