FingerTec FRIS II - Manual (Page 16)

17
Option Function
To add FingerTec terminal(s) into FRIS. A
click on this function will prompt a new
popup WIndow to set configuration for a
new FingerTec terminals.
To edit the existing FingerTec terminal
in FRIS server. You must choose the Fin-
gerTec terminal before you click on this
function.
To delete FingerTec terminals from FRIS
server. You must choose the FingerTec
terminal before clicking on this function.
Option Function
To save settings or changes.
To cancel any settings or changes.
To leave the page and return to the
Main Menu.
This is to display all the connected FingerTec terminals, FRIS server and the Zone they
belong to. You can drag any of the items and re-group them.
Option Function
IP address Enter the IP address of the FingerTec terminal which is being used with FRIS
server. Wrong IP address or improper connection will cause connection failure.
ID Enter the Device number of the FingerTec terminal. Each FingerTec terminal is
user different Device ID.
Read Terminal Details Click here after entering an IP address and the ID. FRIS will try to connect to the
FingerTec terminal to get the terminal details. Terminal details will be shown on
the screen if connection is established.
Serial No The serial number of connected FingerTec terminal. The serial number is read
by FRIS and cannot be changed manually.
Firmware Ver The firmware version applied in the connected FingerTec terminal. This is read
by FRIS and cannot be changed manually.
Model The model of the FingerTec terminal in use with FRIS. The model is read by FRIS
and cannot be changed manually.
Enable To enable the FingerTec terminal to work together with FRIS. Changing it to
“no” will stop the connection between FingerTec terminal and FRIS.
Server The name of FRIS server in use with the connected FingerTec terminal can be
renamed here. This is to lead the FingerTec terminal to a server where the users
fingerprint and transaction log are stored in.
Zone Choose the Zone name where the FRIS server belongs.