FingerTec AC800 Plus MC - Manual (Page 54)

55
MENU
Welcome Check-In
08:24
07-01-08 Mon
Menu u
4 User Manage
Options
PenDrive
Mng
When you see this
|
Do this
OK
Press once
Press once
Press once
Press once
Press once
Key-in ID
Press once
Place card to sensor
Press once
User Manage u
4 Enroll User
FPCard Mng
Enroll Admin
FPCard Mng u
4 Create PINCard
Enroll FPCard
Create FPCard
OK
6
Create PINCard
UserID 00001
ESC OK
OK
ESC
Create PINCard
Show the card
ESC OK
Create PINCard
Write succ
ESC/Exit
OK
FP CARD MNG
Create PINCard
After a fingerprint has been enrolled into a
FingerTec® reader, there will be only one
PIN (Personal Identification Number) to every
user. The system will require user to input ID
for the enrollment. Once the ID is input, press
“OK”. The system will prompt, “Show the card”.
Move the card to the scanner. If the system
accepts the card, it will prompt, “Write succ”,
which means an ID has been established
and the card is ready to be used for attend-
ance. When a PINCard is created, the ID is
not stored in the FingerTec® reader. Please
check and examine the PIN you input to match
the ID in the FingerTec® reader.
Enroll FPCard
In Menu, select User Manage > Enroll User
> Enroll FPCard. When this item is selected,
user will be prompted to store his fingerprint
into the card. This operation is to put your
fingerprint into the card and the fingerprint
template will NOT be saved in the FingerTec¤
reader. Thus, when you report attendance you
need to show your card.