FingerTec AC800 Plus MC - Manual (Page 40)

41
Comm Opt u
4
RS232 Yes
4RS485 Yes
Note
When the RS485
function is ena-
bled, the Ethernet
will be disabled.
RX+
RX-
RS232 cable RS232/RS485
PC Data Converter
RS485 Communication I/O
Converter Plug Controller
RS485 Network Connection
1. Setup of RS485
Access Menu, select “Options” > “Comm. Opt”
> “RS485”, select “Yes” to enable RS485
function.
2. Turn off the reader.
3. Plug the RS485 cable extender to the RS232/485 port on the Power Controller, and an-
other end of the cable to the RS232/485 network.
4. Connect computer to the RS485 network with the RS232/485 converter.
5. Turn the power on.
6. If you are using AC800 Plus or AC800 Plus
MC, connect the RS485 cables to AC800 Plus
or AC800 Plus MC.