FingerTec AC800 Plus MC - Manual (Page 17)

18
Fingerprint Verification
FingerTec ® reader supports 2 types of finger-
print verification method. User can choose
either method to verify his fingerprint at the
FingerTec® reader. 2 types of fingerprint veri-
fication methods are:
• 1 to Many (1:N) fingerprint matching
• 1 to 1 (1:1) fingerprint matching
1 to Many (1:N) Fingerprint Matching
Welcome Check-In
08:24
07-01-08 Mon
FP Verify
Remove fi nger
When you see this
|
Do this
FP Verify
User ID 00001
Verifi ed
FP Verify
Please Try Agn.
Place the enrolled finger prop-
erly on the fingerprint sensor.
Wait a second before removing
the finger from the fingerprint
sensor.
FingerTec® reader verifies that
the user ID is 00001.
If a finger failed to be verified by
the FingerTec® reader, it will
prompt the user to try again.
Welcome Check-In
08:24
07-01-08 Mon
1:1 FP Verify
User ID 00001
ESC OK[Pwd]
When you see this
|
Do this
1:1 FP Verify
User ID 00001
Verifi ed
1:1 FP Verify
User ID 00001
Please Try Agn.
Key in the user ID as defined
when enrolling a finger on the
FingerTec® fingerprint reader.
For example 1 for 00001.
Place the enrolled finger prop-
erly on the fingerprint sensor.
The FingerTec® fingerprint sen-
sor verifies that the user ID is
00001.
If a finger failed to be verified by
the FingerTec® reader, it will
prompt the user to try again.
1 to 1 (1:1) Fingerprint Matching