FingerTec AC800 Plus MC - Manual (Page 45)

46
MENU
Welcome Check-In
08:24
07-01-08 Mon
Menu u
User Manage
4 Options
PenDrive Mng
When you see this
|
Do this
OK
6
Press once
Press once
Press once
Press once
Press 3 times
Press once
Press 10 times
Press once
Press onc
Options u
4 System Opt
Power Mng
Comm Opt
OK
System Opt u
Language ENG
Fmt YY-MM-DD
4 Adv Opt
OK
6
Adv Opt u
Two Sensor N
Voice Y
4 Upd Firmware
OK
6
Plug Pen Drive
Copy Daya succ
Make sure a flash disk is in-
serted properly. Press OK to
unplug the flash disk when
the process completes.
OK
Upd Firmware
User could update the firmware version of a
FingerTec® reader by using a flash disk. Be-
fore a user plugged in the pen-drive into a
reader, please make sure that the firmware
file has been copied to the flash disk. Choose
“Upd Firmware” option as shown on the LCD
and the reader will request user to plug in
the flash disk. Plug the flash disk carefully and
press “OK” to start the updating process.
Perfomance of a reader will be enchanced af-
ter the firmware flash disk upgraded. Please
consult your local dealer for firmware upgrade
patch files as and when nessesary.
Work Code
AC800 Plus and AC800 Plus MC are provid-
ing Work Code feature. The work code feature
allows a user to key in a predefined number
after fingerpint or password verification. User
will key in a number after fingerprint or pass-
word verification. User will key in related work
codes to show purpose of their clocking data,
which can ease management to monitor their
movement. Table below showing examples of
word code function predefined by number.