FingerTec AC800 Plus MC - Manual (Page 50)

51
Alarm CNT
Reader will trigger alarm if a user failed to
get his verification several times continu-
ously. This can avoid not registered users to
interrupt reader. Entering value from 0 to 9,
to define the chances for trial. Entering value
“0” into this option to disable it.
DSen Alarm
This integrated buzzer can alert user when
a door is not closing well. Buzzer will alert
users for a time period before the reader
starts to trigger alarm.
Enter a value from 0 to 999, for example 10
represent 10 sec. Reader will trigger siren
to ring for 10 sec and goes off. Reader trig-
gers alarm immediately when siren goes off.
Duress Option
This function allows user to trigger the alarm
system in case of emergency via reader by us-
ing duress fingerprint. User must register a
finger as duress finger and a successful verifi-
cation of the duress fingerprint will trigger the
alarm.
Management of Duress Fingerprint
• Enrollment of Duress Finger
The procedure to enroll duress finger is the
same as an enrollment of a normal finger-
print.
• Define Duress Finger
Duress finger needs to be defined before
it can be used to trigger the alarm system.
User can choose to enroll new finger or to
use the same fingerprints for clocking activi-
ties for duress finger.
• Undefined Duress Finger
This function allows user to delete duress
finger. If the fingerprint templates for clock-
ing activities which are also used for duress
fingers are deleted from the duress option,
those fingerprints are still available for clock-
ing activities and user do not need to rereg-
ister his fingerprints.
• Delete all
This function is to delete all duress finger-
prints available in the FingerTec® readers.