Digilent WaveForms - Manual (Page 49)

WaveForms™ SDK Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 49 of 85
FDwfAnalogOutWaitGet(HDWF hdwf,
int idxChannel, double *psecWait)
Parameters:
-
hdwf – Open interface handle on a device.
- idxChannel – Channel index.
- psecWait – Pointer to variable to receive the wait length.
The function above is used to get the current wait length for the channel on instrument.
FDwfAnalogOutRepeatInfo(HDWF hdwf,
int idxChannel, int *pnMin, int *pnMax)
Parameters:
-
hdwf – Open interface handle on a device.
- idxChannel – Channel index.
- pnMin – Variable to receive the supported minimum repeat count.
- pnMax – Variable to receive the supported maximum repeat count.
The function above is used to return the supported repeat count range. This is how many times the generated
signal will be repeated upon. Zero value represents infinite repeat. Default value is one.
FDwfAnalogOutRepeatSet(HDWF hdwf,
int idxChannel, int cRepeat)
Parameters:
-
hdwf – Open interface handle on a device.
- idxChannel – Channel index.
- cRepeat – Repeat count to set.
The function above is used to set the repeat count.
FDwfAnalogOutRepeatGet(HDWF hdwf,
int idxChannel, int *pcRepeat)
Parameters:
-
hdwf – Open interface handle on a device.
- idxChannel – Channel index.
- pcRepeat – Pointer to variable to receive the repeat count.
The function above is used to read the current repeat count.
FDwfAnalogOutRepeatStatus(HDWF hdwf,
int idxChannel, int *pcRepeat)
Parameters:
-
hdwf – Open interface handle on a device.
- idxChannel – Channel index.
- pcRepeat – Pointer to variable to receive the remaining repeat counts.
The function above is used to read the remaining repeat counts. It only returns information from the last
FDwfAnalogOutStatus function call, it does not read from the device.