Digilent WaveForms - Manual (Page 38)

WaveForms™ SDK Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 38 of 85
FDwfAnalogOutNodeEnableSet(
HDWF hdwf,
int idxChannel, AnalogOutNode node, BOOL fEnable)
Parameters:
-
hdwf – Open interface handle on a device.
- idxChannel – Channel index.
- node – Node index.
- fEnable – TRUE to enable, FALSE to disable.
The function above enables or disables the channel node specified by idxChannel and node. The Carrier node
enables or disables the channel and AM/FM the modulation. With channel index -1, each Analog Out channel
enable will be configured to use the same, new option.
FDwfAnalogOutNodeEnableGet(
HDWF hdwf,
int idxChannel, AnalogOutNode node, BOOL *pfEnable)
Parameters:
-
hdwf – Open interface handle on a device.
- idxChannel – Channel index.
- node – Node index.
- pfEnable – Pointer to variable to receive enabled state.
The function above is used to verify if a specific channel and node is enabled or disabled.