Toshiba SX 2000 - Manual (Page 77)

Chapt.1 System Configuration
1.7 l/OModules
Various types of direct I/O modules are available for the model 2000, as shown in the
following table. Thus, it can respond to a wide variety of applications.
Direct I/O modules can be mounted on any slot in the base, and in any order.
(See Section 4.7 for recommended arrangements)
Input/Output terminal block
(10/18/20-pin)
Type Description Specification
DI632D
DC/AC input
8-point (each point isolated), 12-24Vdc/ac
DI633 16-point (8 points per common), 12-24Vdc/ac
DI634 DC input 32-point (8 points per common), 24Vdc
DI635 64-point (8 points per common), 24Vdc
DI635H 64-point (8 points per common), 24Vdc, High speed
DI653 16-point (each point isolated), lOOVdc
IN653 AC input 16-point (16 points per common), 100-120Vac
IN663 16-point (16 points per common), 200-240Vac
R0663 Relay output 16-point (8 points per common),
240Vac(+10%)/24Vdc(+20%)
2A/point, 4A/4 points common (max.)
R0662S 8-point (each point isolated),
240Vac(+10%)/24Vdc(+20%), 2A/point (max.)
lOOVdc (+10%),0.3/Vpoint
D0633 Transistor output 16-point(16 points per common), 5-24Vdc
1/Vpoint, 1.2A/4 points (max.)
D0634 32-point (8 points per common), 5-24Vdc
D0635 64-point (8 points per common), 5-24Vdc
D0633P 16-point (16 points per common), 12-24Vdc, source
AC663 Triac output 12-point (4 points per common), 100-240Vac
0.5/Vpoint, 0.6/V2-element SSR (max.)
CD633 Change detect DC
input
16-point (16point per common), 12-24Vdc
status change detect, interrupt generation
AD624L Analog input
(8bit)
4-channel (not isolated between channels),
1 -5V/4-20mA, 8bit resolution
AD634L 4-channel (not isolated between channels),
0-1OV, 8bit resolution
AD624 Analog input
(12bit)
4-channel (not isolated between channels),
1 -5V/4-20mA, 12bit resolution
AD674 4-channel (not isolated between channels),
-10V - +10V, 12bit resolution
60 Sequence Controller S2T