1 s2t configuration as station module, 1 s2t basic configuration, S2t basic configuration – Toshiba SX 2000 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1.1 S2T configuration as Station Module
1.1.1
S2T basic configuration
According to variety of industrial applications, a basic unit or with expansion units are
selected.
The basic unit is composed of a main base, a power supply module, station modules
and direct I/O modules, and an expansion interface is added using expansion units.
The expansion unit is composed of an expansion base, a power supply module,
direct I/O modules and an expansion interface.
Each expansion interface modules are connected with expansion cables.
Up to three expansion units can be connected in the S2T.
The S2T accesses direct I/O modules via the G2-bus in the model 2000.
Chapt.1 System Configuration
Basic unit
Expansion unit
*4: The digital / analog I/O modules can be mounted in the *4 slots in place of the station modules.
Fig.1-1-1 An example of S2T basic configuration as station module
Sequence Controller S2T