7 communication parameter setting, Communication parameter setting, R 'smii – Toshiba SX 2000 User Manual
Page 41: I malgjal, Wotfe
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapt.1 System Configuration
1.3.7
Communication parameter setting
The communication parameter is set by writing it into the system information memory
of the S2T.
Turn the S2T to HALT mode, then set the communication parameter in the system
information.
(T-PDS screen example)
T-PDS32 for Windows - [UNTITLED] - Ma
F_ile Edit VieiAi Search PLC D.ebug Oommenl Option Windoyv idelp
-¡g|
«I malgjal
System Comments:
¡=:^sTem =
Memory Capacity:
Steps Used:
PLC Type:
PLC Version:
T-PDS Version:
64KS /8KW
0
S2T
T-PDS32 for Windows V2.1 4
i-PLC Date
& Time
Date:
PC.:~n
I
Wotfe ^----
(T aian%
r 'Smii
fiError Status
& Diag. Msg.=
E r r o r D i a g . Msg. |
Memory Size & Scan T'“c~
I
Retentive Memory Area... |
Computer Link...
I
------------- * ■ ■ ■
^
—' —
-
- ■
fc
____________________________ _____________________ ------------------------------------------------------------------'
-laj
Comm Port:
Baud Pate:
96Ü0
I ^
Parity:
Cdd
I“
Data Bits: S
:
1
Stop Bits:
O F F L I N E
|rr;;;OK;.r;3 cancel | Help
■-.M
Set station number, baudrate, parity, data bit length,
and stop bit.
After the communication parameter setting, write it into the S2T’s built-in EEPROM
before turning off power.
24
Sequence Controller S2T