Check the reservation content, To change the reserved contents, When timer operation is not required – Kenwood UD-952 User Manual
Page 72: To set the same timer program again
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UD-952 (En)
I Adjust the clock before setting the timer. |
n
To continue play after the power is turned ON by the timer
1
a
(QED^
I
@ Press the numeric key of the timer
i ^ i
program No.
© s s s
Qll№
t''
* Check that the program No. indicator of the timer program being
executed is not lit.
Check the reservation content
program No. is blinking!)
(
2
)
Press the numeric key of
the timer program No.
• The reserved contents will be displayed for 3 seconds per item.
After this, the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer program reservation" from the begin
ning.
When timer operation is not required
AifTIT^B
D Press the numeric key of the timer
program No.
r u
Goes off.
» The reservation contents are held in memory.
To set the same timer program again
© Press the EXE. key.
® Press the numeric key of the timer
program No.
(3)
Turn the power OFF.
t Also prepare the disc or tape and adjust the listening volume.
I
Note
I
The reservation contents cannot be cleared. The contents are cleared only when they are changed.