Kenwood UD-952 - Manual (Page 36)

I^TUNER Storing radio stations in memory (Station preset)
, Up to 20 broadcast stations can be stored as preset stations
S with a preset number assigned to each of them.
Once stations are preset, they can be received by simply
i specifying their numbers.
preparation.
I Receive a station to be stored in pre­
set memory.
/ Press the ENTER key during reception.
Go to step 2 within 5 sec.
If more than 5 seconds have elapsed,
press the ENTER key again.
® Select the "TUNER" input with the
MAIN INPUT key.
ssll f'
°o
ml_______________Imit®
r,
I Remote control unit only |
• The station being received will be stored in preset memory.
Press the numeric keys as follows.
To store the station in preset "15" ; |+1D|,
To store the station in preset "20" ■■ ra.ra.ioi
• To preset other radio stations, repeat steps 1 and 2 for each of
them.
• If the preset number assigned to a station has already been as­
signed to another, the new memory content replaces the old con­
tent.
I Remote control unit only |
Press the numeric keys as follows.
To received the station in preset "15": |+10|, fsl
To receive the station in preset "20" ; |+10|, l+10|, 0
Receiving preset stations in sequence (Preset call)
Press the P.CALL key.
® Select the "TUNER" input with the
MAiN INPUT key.
(й) (и)
I
Remote control unit only |
• Every time the key is pressed, the preset stations are switched over
as follows.
I--------------------------------------------------1
When A is pressed j ^ B........................................ !B~^ IB > BB
When V is pressed
1
' — — B ..... IB — IB—BB
When a key is held depressed .....Preset stations will be skipped at
an interval of about 0.5 second.