Kenwood UD-952 - Manual (Page 25)

Playback from desired track
J Check that the "PGM" indicator is not lit.
The "PGM" gose off.
Select the desired track.
(p Select the disc No.
o d d
6 6 6
6
' ( 2 ) Select the track No.
» If the "PGM" indicator is lit, press the P.MODE key of the rennote
control unit to turn it off.
• By using the remote control unit, the desired track No. can be speci­
fied with numeric keys.
Press the numeric keys as shown below....
To enter track No. 23: |+10|.|+10|. [Tl
To select track No. 40: l+10|, l+10|, k10|, i+io],
• Playback starts from the selected track and continues on the sub­
sequent tracks.
• If a track number which does not exist on the disc is selected while
the tray is open, the last track in the disc will be played.
• Once the tray has been closed or disc has started to play, it is not
possible to select a disc which does not exist on the disc.
Skipping tracks
To skip forward
Q 3
To skip backward
Set the A/B switch to B when operating this function with
the remote control unit.
i When the key is pressed once during playback, the track being
played will be played from the beginning.
Searching
Forward search
Backward search
Set the A/B switch to A when operating this function with
the remote control unit.
• Playback starts from the position where the key is released.