Kenwood UD-952 - Manual (Page 47)

Cross-fade edit recording
The cross-fade editing may be easier to understand by saying
that it is a function for cross-fading tunes than saying that it
edits the order of tunes. This function can be used in combi­
nation with the program edit recording and timed edit record­
ing as well as in simple recording of CD tracks in the order
they are recorded on the CD.
Preparations • Load a cassette tape in deck B.
• Select the tape transport direction {◄
or^).
• Select "ZD" (two-side recording).
• Sele ct the Dolby NR mode.
• Select the "CD" input with the MAIN
INPUT key.
. • Insert disc(s) in the CD player.
The equalizer and presence effects applied to the music are recorded
^together with the music sound.
In case the order of tracks on CD is to be edited
® Perform the editing steps of pro­
gram or timed edit recording.
D Start edit recording.
• After the editing operation, do not press the OCRS key, but return to
this page and go to step If the OCRS key is pressed after edit­
ing, the corresponding edit recording will start in place of cross-fade
recording.
Program editing ^ ^
Timed editing * gg
• High-speed recording is not possible.
• The recording level and bias will be adjusted automatically in approx.
90 seconds, after which recording starts.
In case the CD tracks are to be recorded in the order they
are recorded on CDs
E
® Select the disc to be recorded.
6 © ©
© 6 6
6
D Start edit recording.
• High-speed recording is not possible.
• The recording level and bias will be adjusted automatically ir
90 seconds, after which recording starts.
If a CD track which has already been faded in or out is recorded by cross-fade recording, the space between the adjacent tune may
become very long.