Kenwood UD-952 - Manual (Page 28)

Preparation
I Select the "CD" input with the MAIN
INPUT key.
► Load discs in the CD player.
Repeated playback
To repeat only the programmed tracks
Time display on CD player
Each press of the TIME key changes the displayed contents.
(T) Elapsed time of track being played
(|) - Remaining time of track being played
(3) Elapsed time of entire disc
—'® IS Remaining time on entire disc
(- - - - The "SINGLE TIME" display remains in this condition
during playback of track No. 21 or later.)
» Only the SINGLE TIME displays are shown in the PGM and RAN­
DOM modes.
UD-959 [En)
Press so that the "PGM" Indicator lights.
» If the track No, is not selected within 8 seconds after having se­
lected the disc No. all of the tracks on the disc will be programmed.
» All of the programmed tracks will be repeated.
» In case only one track is programmed, only that track will be re­
peated.
» Up to 32 tracks can be programmed by repeating steps (D and ®.
» To play only the disc on the Plus-1 tray repeatedly, press the Plus-1
tray in step (D and wait for more than 8 seconds.
Press so that the "REPEAT" indicator lights.
3 4 5
Is ►
1— n 1 ri ■ n n U 1 u ■ u u
To stop repeated playback
Press the REPEAT key again.
• The REPEAT indicator goes off and the playback following the cur­
rent mode of the CD player starts.
To repeat all discs
• All of the tracks on the all of the discs in the magazine and Plus-1
tray will be played repeatedly.
Press so that the "PGM" indicator goes off.
b 3.-Re
Press s 0 that the "REPEAT" indicator lights.
I s ► b a 1
Press the REPEAT key again.
• The REPEAT indicator goes off and the playback following the cur­
rent mode of the CD player starts.