Brother INTELLIFAX 600 - Manual (Page 75)

SENDING FAXES
Contrast
Contrast is the difference in lightness between the black and
white parts of a document. This can vary depending on the
color of the paper and the quality of text. A document typed
with a new nylon ribbon on white paper will have higher
contrast than one typed with an old ribbon on colored paper.
The IntelliFAX600/650M has automatic contrast control that
allows it to decide which areas of the document are white and
which are black.
Occasionally you may have a very light or a very dark
document that does not give good results when faxed. In this
case you can ovemde the automatic control, and set the
contrast to SUPER LIGHT to send a very light document or
SUPER DARK to send a very dark document.
Overseas Mode
Overseas mode provides an efficient method for sending your
fax overseas.
Temporary Settings
If you have a document that is very light, you can set the
contrast manually using the TEMP. SETTINGS function. You
can also use the TEMP. SETTINGS to change the resolution
page by page, or to send your fax overseas.
One important use for Temporary Settings is for Multiple
Resolution transmission. This allows you to pre select the
resolution for each document being sent.
When you set the resolution using the RESOLUTION key, this
sets the resolution for the whole document. However, some
documents may need different resolution settings for different
pages. For example, if you had a document with a lot of text
pages and a few photographs, you would want to send the text
pages in standard mode for minimum transmission time, and
the photographs in photo mode.
The IntelliFAX600/650M allows you to set the resolution for
each page of a document, using the RESOLUTION option of
the TEMP. SETTINGS function.
After the fax has been sent, contrast will revert to AUTO,
resolution will revert to STANDARD and overseas mode will
revert to OFF.
8-7