Brother INTELLIFAX 600 - Manual (Page 114)

TROUBLESHOOTING
Problems When Copying
P roblem POSSIBLE CAUSE ACTION Ref.
Copy is blank or faint • The original document was
put in the feeder upside-down
• Recording paper roll
installed the wrong way
round
• Wrong type of recording
paper
• Replace the document in the
feeder the correct way up
• Replace recording paper roll
the correct way round
• Replace with the correct
Brother paper
2-2
Overall poor image quality •
Poor quality original
•
Inappropriate resolution
setting
• Use only good quality
originals
• Use PHOTO mode for
photographs
• Replace with the correct
Brother paper.
8-5
Vertical streaks on the copy • Dirt on die scaimei
• Scanner fault
• Dirt on the thermal print head
• Printer fault
• Clean the scanner
• Contact your Brother service
if the problem persists
• Clean the print head
• Contact your Brother service
if the problem persists
15-1
Problems When Dialing
PROBLEM POSSIBLE CAUSE ACTION Ref.
• The one-touch key or • Dial the number manually, or 8 - 1
N O T R E G I S T E R E D speed-dial number you
selected has no number
assigned to it
enter the number in the auto
dialing memory
Dialing does not work • The call failed to connect • Check the number and try
again
* You have set TONE/PULSE
dialing incorrectly
• Check the type of dialling on
your telephone line
5 2
• Telephone line disconnected
or faulty
• Check the connection and test
the line with a known good
telephone
2-6
• Power not connected • Check that the LCD is
indicating date and time.
re-connecct the power if
necessary
2-5
14-3