Sending a fax using chain dialing, O © 0 – Brother INTELLIFAX 600 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SENDING FAXES
S E N D I N G
If the called party answers the call manually, you can have a
conversation.
If you want to send a fax after speaking to the called party,
press the START key after the called party has pressed theirs
and is putting fax tones onto the line.
The IntelliFAX600/650M will begin to send the fax.
You may now replace the telephone receiver.
Sending A Fax Using Chain Dialing
c
O R
O R
O 0 ©
00©
0 0 0
O 0©
0 0©
O © 0
©00
O © 0
Place the document in the feeder.
Press the chain dial number first (you can do up to 5 chains per
dialing sequence).
Press other registered telephone numbers.
Press the START key.
Note:
- You can place a pause either at the end of a chain number or
the begining of the next chain number to allow time for
delayed dial tones.
- Depending on the type of telephone credit card you are using
it maybe necessary to register the telephone numbers as chain
dial numbers and the access code as a regular number,
- If you are doing manual dialing any pause keys must be
placed into the registered chain dial number.
8-4