General machine errors and paper jams, General machine errors and paper jams -1, Troubleshooting – Brother INTELLIFAX 600 User Manual
Page 113: Problem possible cause action ref
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING
General Machine Errors And Paper Jams
PROBLEM
POSSIBLE CAUSE
ACTION
Ref.
• The cover is not latched
properly
• Push down the cover gently
but firmly until the latches
click
C O V E R O P E N
2—2
• The recording paper roll is
empty
• Install a new roll of recording
paper
2-2
P A P E R R O L L E M P T Y
• The recording paper roll is
not set correctly
• Set the roll correctly
2-2
P A P E R S E T E R R O R
• Dirt on the scanner
• Clean the scanner
• Contact your Brother
service if the problem
persists
15-1
S C A N N E R E R R O R
• Overheating of the thermal
print head
• Fault in the thermal print
• Check that ventilation slots in
P R I N T E R F A U L T
the back and base of the
I
A LT ER N A T E
|
machine are unobstructed
P R E S S S T O P K E Y
head
before re-connecting
• Contact your Brother service
if
the problem persists
• The recording paper roll is
not set correctly
• The recording paper or
something is in the cutter
• Set the roll correctly
• Open the cover and remove
objects from the cutter unit
2-2
P R I N T E R J A M
C U T T E R J A M
unit
• Overheating, etc.
• Check that ventilation slots in
M A C H I N E E R R O R X X
the back and base of the
I
A LT ER N A T E
|
machine are unobstructed
¡ P R E S S S T O P K E Y
before re-cormecting
• Contact your Brother service
if the problem persists
14-2