Brother INTELLIFAX 600 - Manual (Page 79)

SENDING FAXES
3.Temporary Setting Of Overseas Mode
I
When you are having trouble sending overseas, you may wish
to turn ON the overseas mode.
ij] dOl
To change the overseas inode setting:-
Place the document in the feeder.
1. T E M P . S E T T I N G S
’©
After selecting the TEMP. SETTINGS, press the 3 key.
3 . O V E R S E A S M O D E
S£T
L . . I
OR I )
3.0 VERSE AS MODE will appear in the display, then press
the SET key.
An alternating display will prompt you to change the overseas
mode setting using the cursor keys, then press the SET key.
Use the cursor keys to select ON or OFF. If you decide not to
change the setting, just press the SET key to exit.
O V E R S E A S ; O N
SET
I ' " I
3 . O V E R S E A S M O D E
Press the SET key.
The display will revert to 3. OVERSEAS MODE.
© o r “ ©
O 0 ©
O 0©
0 00
© 0 0
OR c
If you wish to set another TEMP. SETTINGS, press a number
key, otherwise press the STOP key.
You can now send your fax in usual way. After transmission,
overseas mode will revert to OFF.
8-11