Sending faxes, Sending a fax automatically, Sending a fax automatically -1 – Brother INTELLIFAX 600 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SENDING FAXES
8. SENDING FAXES
In a previous section you learned how to use the Intelli-
FAX600/650M as a copier. This section tells you how to send
faxes. It’s important to remember that the same rules about
what documents are suitable for copying also apply to
documents for transmission, so if you skipped that section it’s
a good idea to read it now.
The IntelliFAX600/650M has many features for ease of use
and to enhance the quality of transmitted faxes. After looking
at the basics of sending a fax, we will go on to discuss some
of these more advanced features.
Sending A Fax Automatically
0 3 / 1 4 / 1 9 9 2
1 2 ; 4 3
To send a fax, first insert the document you wish to send, face
down,
in the document feeder, just as when making a copy.
^ I
dOi
O 0 ©
©
©0
©0©
O © 0
C O P Y
P R E S S C O P Y
I
ALTERNATE
\
F A X :
N O . & S T A R T
0 6 1 3 3 0 6 5 3 1
The top edge of the document should face into the feeder,
otherwise your fax will be received upside-down.
After you insert the document, the display will change,
prompting you to press the COPY key, or dial a fax number
and press the START key.
Dial the number of the destination, using one of the following
methods.
1, Manual Dialing
Dial each digit of the destination fax number on the numeric
keypad.
The number will appear in the display as you dial, so that you
can check if it is correct.
B R O T H E R F R A N C E
2. One-Touch Dialing
Up to five fax numbers can be stored, and recalled using one
of the five one-touch buttons located immediately below the
display. To dial one of these stored numbers, simply press the
appropriate button.
When you press a one-touch button, the name of the
destination will appear in the display.
8-1