Brother INTELLIFAX 600 - Manual (Page 43)

SETTING THE USER OPTIONS
5. SETTING THE USER OPTIONS
After reading the previous section on using the
IntelliFAX600/650M functions, you are now ready to proceed
with configuring the machine. As mentioned in the previous
section, the configuration is carried out under two function
items, USER OPTIONS and SETUP SYSTEM.
To access the USER OPTIONS function
FUNCTION
cr )
Press the FUNCTION key.
©
Press die 5 key.
5 . U S E R O P T I O N S
3 ^ 1
SET
... 1
0
1 . T O N E / P U L S E
SET
I i
OR
2 SECOND DELAY
The USER OPTIONS function will appear in the display.
Press the SET key. The display will begin to scroll through the
sub-function items that are available for USER OPTIONS.
At this point you can select the TONE/PULSE option by
pressing the 1 key and the SET key, or pressing the 1 key and
waiting two seconds. In the following sections, for simplicity,
only the number key plus SET key method of selecting a
function item is used, but don’t forget that you can use both
methods.
If you wish to change more than one user option, you can do
this without exiting from the user options function. When you
have finished setting one option, just select the next option
using number key. When you have finished setting all the
options you wish to change, press the STOP key.
5-1