Receiving fax and other calls – Brother INTELLIFAX 600 User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECEIVING FAX AND OTHER CALLS
If your external TAD has a paging function, the unit may
prevent the paging function from working.
Some fax machines may not be able to signal your fax machine
to switch on automatically during a transmitting. To cover this
possibility we recommend that you record a message on your
TAD requesting the sending party to enter the Remote Code
on his unit before transmission.
A sample message; "Our answering machine is connected to
a fax unit at present, so if you would like to send a fax, please
press the xxx (your Remote Code) by tone signal and send your
fax after you hear the FAX tone. If you would like to leave a
message, please do so after this message. Thank you."
Note;
- When you pick up the handset of the fax while conversation
on an external telephone, you will hear an alarm and the
display will prompt "EXT. TEL IN USE".
When you want to use the fax unit handset, first press HOOK
key, which will disconnect the external telephone and enable
the use of the fax unit handset
9-6