Station id, Station id -6, System setup – Brother INTELLIFAX 600 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM SETUP
SET
S T A R T A T Q 0 0 0
S T A R T A T 1 0 0 0
S T A R T A T 1 9 0 0
S T A R T A T 1 9 4 0
S T A R T A T 1 9 4 5
Enter the start time for the activity report print in 24 hour
format.
After entering the fourth digit, press the SET key. The display
will revert to the 3.INTERVAL display.
3 . I N T E R V A L
If you want to change another system setting, press a number
key, otherwise press the STOP key to exit.
Note;
- You can also print the activity report on demand. See page
13-1.
- The default setting for interval is "OFF".
4.Station ID
6 . S E T U P S Y S T E M
■©
4 , S T A T I O N I D
SET
The STATION ID is printed on the coverpage, and at the top
of each page of every fax you send. It also identifies your fax
machine to other callers who wish to send faxes to you. Station
ID is an important feature, since it verifies that each page of a
fax has come from your fax machine, and lets callers know that
they are sending to the correct destination.
You can enter your name or company name, fax number and
telephone number in the station ID.
To set the station ID on your IntelliFAX600/650M;
After selecting the SETUP SYSTEM function option, press
the 4 key.
4.STATION ID will appear in the display, then press the SET
key.
You will be prompted to enter your fax number and press the
SET key.
6-6